Overviews
Three in one EOC master is outdoor EOC master with EOC module , ONU module and OR module . Three in one . EOC Master module based on Qualcomm AR7410 chipset . Low frequency 7.5~65MHzband is used for EOC signals . OR module can provide HFC optical input and one RF output . AGC .Optical output level up to 108dBuV. ONU module support IEE802.3ah standards. Speed 1.25g . Used the GEPON technology. It is the best choice of EPON+EOC solution .
Feature
Item | Parameters | Specification |
Specification of EOC Module | ||
Interface and LED Indicator | RF Port | One TV (CATV Signal) Output, metric F-Female
One CABLE (Mixed Signal) Input, metric F-Female |
Ethernet Port | Two 10/100/1000Mauto-negotiation, RJ45 | |
LED Indicator | 1 for Power Supply Status
1 CABLE Link Status indicator 2 for Ethernet Ports Status |
|
Performance Parameters | RF Parameters | Frequency Band :7.5-65MHz
RF Output Level:110±[email protected] output of module Receive sensitivity: 45dBuv Return Loss:>16dB Output Resistance:75Ω |
Transmission | PHY Layer:600Mbps
Throughput on MAC Layer:320Mbps |
|
Modulation Mode | OFDM~ 2690~carriers 4096,1024,256,64,16,8~QAM, QPSK, BPSK, ROBO | |
Working Mode | TDMA/CSMA | |
Encryption Mode | AES-128 | |
Standard | EOC Standard | IEEE P1901(Draft)
HomePlug AV |
Ethernet Standard | IEEE 802.3, IEEE 802.3x, IEEE 802.3u
IEEE802.1P, IEEE802.1Q |
|
Software | Network Management | WEB, CLI, SNMP |
Software Features | VLAN, QOS, Bandwidth Control, Broadcast storm limitation |
Specification of OR | ||
Optical Specifications | Wavelength | 1100~1600 nm |
Optical Power Input Range | -8~+2 dBm | |
Recommend optical Power Input Range | -6~0 dBm | |
Optical Input Return Loss | ≥45 dB | |
RF Specifications | Bandwidth | 45~870 MHz |
Flatness | ≤±0.75 dB | |
Stability of RF output under Operating Temperature | ≤5 dB | |
Nominal RF Output Level | 108 dBuV | |
Impedance | 75 Ohm | |
Return Loss | ≥14 dB | |
CNR | ≥51 dB | |
CSO | ≥60 dBc | |
CTB | ≥65 dBc | |
Power consumption | <7.5 W | |
Optical and temperature AGC | Stability of RF output under optical AGC | ≤±1 dB |
AGC Scope | -6~0dBm | |
LED Indicator | Indicator Description | RUN: module operating , RF: RF signal
PWR:Power is coming up OPTH: Optical power is higher OPTM: Optical power is nominal OPTL: Optical power is lower |
Specification of ONU Module | ||
Interface | PON Interface | One EPON port , Meet 1000BASE-PX20 standard
Up to 1.25Gbps Upstream and Down-stream SC Connector , Single-mode fiber, single-strand Maximum split ratio 1:64 , Up to 20Km distance @ 1:32 |
Ethernet Interface | Two 10/100/1000Mauto-negotiation
Full/Half-Duplex RJ45 type connector , Auto MDI/MDI-X Up to 100m distance |
|
Performance Parameters | PON Optical Parameters | Wavelength: Upsteam1310nm, Downstream 1490nm
Transmitter Optical Power: 0~4dBm Optical Receive Sensitivity: -27dBm Saturation Optical Power:-3dBm |
Data Transfer Parameters | Data Transfer Rate: Upstream 900Mbps;Downstream 950Mbps
LAN Interface: 1000Mbps Packet Loss:<1*10E-12 latency:<1.5ms |
|
Business Capability | Layer 2 wire speed switching
Support VLAN TAG/UNTAG,VLANconversion Support Port-based speed limitation Support Priority classification Support storm control of broadcast |
|
Network Management | Management Mode | Support IEEE802.3 QAM, ONU can be remotely managed by OLT
Support Remote management through SNMP and Telnet Local management |
Function | Status monitor, Configuration management, Alarm management, Log management | |
Indicator | Indicator Description | PWR: Power up or down
LOS: Optical Link Status PON:ONU registered LNK: Link Status |